SZFEAT牌冷凝式水雾（水蒸汽）分离回收装置是为各水基类型的超声波清洗设备、喷淋清洗设备所产生的水雾进行冷凝回收的环保产品。主要由制冷压缩机、风冷式冷凝器、特制蒸发器、离心式抽风机、排风机、安全保护系统、电器控制系统等组成。具有节能、环保、安全等优点。工作原理是：将各类清洗设备水雾排放口连接至冷凝式水雾（水蒸汽）分离回收装置的吸入口。离心式抽风机将水雾通过高速离心分离水雾后并送入配有蒸发器的冷凝室进行冷凝结露，露珠随着自身的重力及离心力作用下，在冷凝室的内壁顺流而下，汇流到接水盘中，此处可分离水雾中水份约85%左右。剩余少量含水雾气体经抽风机抽入到风冷式冷凝器内，由于风冷式冷凝器需要给压缩机散热，自身带有温度（一般在35度左右），且冷凝器为翅片状在高速抽风过程中对水雾进行再次的过滤及干燥处理后排出。冷凝器过滤阻挡的部分水珠收集到接水盘中，经接水盘小孔流出到收集桶内或者还原于清洗设备中继续使用，以保持环境的清洁。

As an environment-friendly product, FEAT brand condensing water mist (water vapor )separating and recycling equipment is intended to condense and recycle the water mist produced by ultrasonic cleaning equipment and spray cleaning equipment of various water base type, which mainly consists of refrigeration compressor, air-cooled condenser, special evaporator, centrifugal suction fan, exhaust blower, safety protection system, and electrical control system featuring the merits of energy saving, environmental protection and safety.   Its working principle is as follows: connect the water vapor exhaling outlet of cleaning equipment to the inhale inlet of condensing water mist (water vapor )separating and recycling equipment. The high-speed centrifugal suction fan separates the water vapor and then sends them to condensation chamber fitted with evaporator for condensing into dew. Driven by their own weight and centrifugal force, the dew flows downward along the interior wall of the condensation chamber into water-gathering tray where about 85% water has been separated from vapor. The remaining vapor containing water in small quantity will be drawn via air suction fan into air cooled condenser which has temperature (normally around 35 degrees centigrade)taken from compressor during the process of heat dissipation for the latter. The fin-shaped condenser will filter and dry the water vapor once again in the process of fast air suction before discharging. The water drops filtered by condenser will be collected into water-gathering tray and then sent into gathering barrel through small holes of tray or returned to cleaning equipment for reuse.